New Leader Raven OMNiPOWER NL5000 G5, Operator'S Manual

Page: 15 / 268

- 14 -
www.NewLeader.com
(800) 363-1771
317314-C
Raven OMNiPOWER NL5000 G5
Operations
General Safety Rules
DO NOT CLIMB OR STAND ON MACHINE
Figure 1�12 - Never allow any personnel to ride in or on the machine�
Use inspection ladder or portable ladder to view the unit� Use caution
when getting on and off the ladder, especially in wet, icy, snowy or
muddy conditions� Clean mud, snow and ice from steps and footwear�
Always maintain three-point contact with steps, ladders and
handholds� Face the machine when mounting and dismounting
inspection ladder� Do not jump off machine�
Figure 1�12
OPERATE MACHINE SAFELY
Always walk around and visually inspect machine before using� Check the immediate vicinity of machine
for people and obstructions� Ensure adequate visibility�
Avoid distractions such as reading, eating or operating personal electronics while operating machine�
Never operate the machine under the influence of alcohol, drugs or while otherwise impaired.
Always come to a complete stop before reversing� Be sure that all personnel are clear of machine path�
Turn around and look directly for best visibility� Ensure all rear view mirrors are properly installed and
adjusted� Use a signal person when backing if view is obstructed or when in close quarters�
Always disengage hydraulics before shutting down engine� DO NOT start engine with hydraulics
engaged�