New Leader Raven OMNiPOWER NL5000 G5, Operator'S Manual, Page: 118 / 268

- 112 -
www.NewLeader.com
(800) 363-1771
317314-C
Raven OMNiPOWER NL5000 G5
• Using the control buttons (Reset,
Run, Stop), run a catch test� If spreading product
that has already been tested, press
to
continue� To begin a test, press � Conveyor will
run�
• Once controller dispenses specific amount,
conveyor will stop� Press to continue�
• Weigh material dispensed and enter actual weight
of material dispensed� Press to continue�
• It is recommended a minimum of three (3) tests be
done PER PRODUCT to ensure accuracy� Once
each test is done, press “Repeat Calibration” to
run a subsequent test. When finished, press �
• The main Calibration screen will appear� To
calibrate with a known amount brought to a field,
press �
Note:
Field totals can be reset from Summary
Screen if needed�
Controller Operations