Netberg Demos R130 M2, Manual

Page: 232 / 263

Rail Kit Assembly
219
9.2. Installing the Inner Rail
Follow these instructions to install inner rail:
1. Slide the release tab to the open position and remove the inner rail from the rail kit assembly.
Figure 9.1. Disassembling the Rails
2. Align and insert the holes on the inner rail into the pins on the side of the chassis.
Figure 9.2. Installing the Inner Rail
3. Slide the inner rail until the latch key on the rail locks and is secure to the chassis.
4. Secure the rail with the single screw.