Netberg Demos R130 M2 Manual Download Page 153

Page: 153 / 263

Server Management Software

140

6.9. Platform Event

6.9.1. Platform Event Filter

The BMC implements selectable action on an event or LAN alerting base on event. By default, no

any PEF entries or actions exist, applications need to configure it to enable.

• Dedicated and Shared NIC

• The policy to match an event to Platform Event Filter Table entry is IPMI 1.5 standard.

• The action support Power Off, Power Reset, Power Cycle and NMI.

• All Platform Event Filter Table is default disabled.

• PEF Startup Delay and Last Processed Event tracking is not supported.

• PEF table lookup isn’t correlated to log SEL to SEL Repository.

• Serial Alerting is no support.

Summary of Contents for Demos R130 M2








































































































































































































































































Search results

Summary of Contents for Demos R130 M2

Reviews:

Related manuals for Demos R130 M2

Brands by name

Popular brands

Netberg Demos R130 M2, Manual

Search results

Summary of Contents for Demos R130 M2

Reviews:

Related manuals for Demos R130 M2

Brands by name

Popular brands