Netberg Demos R130 M2, Manual

Page: 225 / 263

Web Graphical User In-
terface (GUI) for ESMS
212
8.8. Maintenance Group
This group of pages allows you to do maintenance tasks on the device. The menu contains the fol-
lowing items:
• Firmware Update
• Preserve Configuration
• Restore Factory Defaults
• System Administrator
Figure 8.42. Maintenance Menu
8.8.1. Firmware Update
In ESMS GUI, this wizard takes you through the process of firmware up gradation. A reset of the
box will automatically follow if the upgrade is completed or cancelled. An option to preserve con-
figuration will be presented. Enable it, if you wish to preserve configured settings through the up-
grade.
Please note that after entering update mode widgets, other web pages and services
will not work. All open widgets will be closed automatically. If upgrade process is can-
celled in the middle of the wizard, the device will be reset.
The firmware upgrade process is a crucial operation. Make sure that the chances of a
power or connectivity loss are minimal when performing this operation. Once you en-
ter into Update Mode and choose to cancel the firmware flash operation, the ESMS
card must be reset. This means that you must close the Internet browser and log back
onto the ESMS card before you can perform any other types of operations.
To open Firmware Update page, click
Maintenance > Firmware Update
from the main menu. A
sample screenshot of Firmware Update Page is shown in the screenshot below.