229
Chapter 11. Installation and
Assembly Safety Instructions
Guidelines
The power supply in this product contains no user-serviceable parts. Refer servicing only to quali-
fied personnel.
Do not attempt to modify or use the supplied AC power cord if it is not the exact type required. A
product with more than one power supply will have a separate AC power cord for each supply.
The power button on the system does not turn off system AC power.
To remove AC power from the system, you must unplug each AC power cord from the wall outlet
or power supply.
The power cord(s) is considered the disconnect device to the main (AC) power. The socket outlet
that the system plugs into shall be installed near the equipment and shall be easily accessible.
SAFETY STEPS
: Whenever you remove the chassis covers to access the inside of the system,
follow these steps:
1. Turn off all peripheral devices connected to the system.
2. Turn off the system by pressing the power button.
3. Unplug all AC power cords from the system or from wall outlets.
4. Label and disconnect all cables connected to I/O connectors or ports on the back of the system.
Summary of Contents for Demos R130 M2
