Netberg Demos R130 M2, Manual

Page: 202 / 263

Web Graphical User In-
terface (GUI) for ESMS
189
1. Enable the
RADIUS Authentication
checkbox to authenticate the RADIUS.
2. Enter the port number in the
Port Number
field.
3. Enter the time out value in seconds in the
Time out
field.
4. Enter the address of the server in the
Server Address
field.
5. Enter the authentication secret for RADIUS Server in the
Secret
field.
6. Click
Save
to save the entered details.
7. Click
Reset
to reset the entered details.
8.6.8. Remote Session
In ESMS SP, use this page to configure virtual media configuration settings for the next redirection
session. Encryption is disabled by default.
To open Remote Session page, click
Configuration > Remote Session
from the main menu. A
sample screenshot of Remote Session Page is shown in the screenshot below.
Figure 8.28. Remote Session
The fields of Remote Session Settings Page are explained below.
Table 8.15. Remote Session Settings Page
ITEM DESCRIPTION
KVM Encryption Enable/Disable encryption on KVM data for the next redirection session.
Media Encryption Enable/Disable encryption on Media data for the next redirection ses-
sion.
Virtual Media Attach
Mode
Two types of VM attach mode are available:
- Attach: Immediately attaches Virtual Media to the server upon bootup.
- Auto Attach: Attaches Virtual Media to the server only when a virtual
media session is started.
Save To save the current changes. NOTE: It will automatically close the exist-
ing remote redirection either KVM or Virtual media sessions, if any.
Reset To reset the modified changes.