Neopost IS-440, User Manual, Page: 94 / 204

Managing Accounts and Access Rights
88
5
Managing the Operators
In mode
Account with Access control
and as supervisor, you can create up to 20 'op-
erators' that each correspond to a PIN code (see
Accounting and Access Rights
Overview
p.73 ).
Operator Parameters
You have to set the following parameters when creating operators.
Table 3 : Operator parameters
5.6 Managing the Operators
This section only applies to the mode Account with Access control
(see
Accounting and Access Rights Overview
p.73 )
If you use a postal expense software, the operator PIN codes are
only managed from the software on the PC.
Param. Format Description
PIN code 4 digit Operator PIN code. Two operators cannot
have the same PIN code.
Name 20 alphanumeric
characters
Operator name. Two operators cannot
have the same name.
Status Active/Inactive Users can only log in using active opera-
tor's PIN codes.
List of accounts
and groups * Accounts that the operator may use.
* User screens never display groups or subgroups. Only (active)
accounts are displayed.
DELTA2_IR.book Page 88 Vendredi, 18. septembre 2009 1:07 13