Neopost IS-440 Page 45 User Manual Download

Page: 45 / 204

Processing Mail

In other modes (Manual weight entry

, no weight ...)

From the [Standard ] home screen:

Press .

System

motors start running.

Insert the mail piece into the mail path against the rear-guide
wall, side to be printed facing upwards.

The mailing system applies postage and the mail piece (or

label) is sent to the catch tray.

To print several identical labels :

Press

and enter the number of labels.

Make sure the labels are available in the label dispenser (see

Filling the Label Dispenser

p.62 ).

Press

to print the labels.

If a mail piece is bigger than mail path maximum thickness (see

Mail Specifications

p.191 ), press

to print a label. The

label is printed at once.

When sealer is activated, collect the mail stack in the catch tray
and put stack aside to let envelopes dry.

DELTA2_IR.book Page 39 Vendredi, 18. septembre 2009 1:07 13

Summary of Contents for IS-440













































































































































































































Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands

Neopost IS-440, User Manual

Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands