manualshive.com logo in svg

Neopost IS-440, User Manual, Page: 189 / 204

Share
Download
Neopost IS-440 User Manual Download Page 189

Troubleshooting

183

11

Label  Jamming 

A Label is Jammed in the Base

How to Clear a Label Jammed in the Base

How to Clear a 
Label Jammed in 
the Base

To clear a label jammed in the Base:

1

Remove all labels from

the dispenser.
Check that no label is

stuck in the bottom of the

dispenser.

2

Pull the release handle

located underneath the

base to lower the

transport belts and

wheels. Hold the handle.

3

Using your other hand,
remove jammed label.

4

Release the jam release
handle to put the

transport belt and

wheels back in position.

11.2 Label  Jamming 

Possible causes 

Actions 

A label is blocked in the Auto Label-Dis-
penser or in the transport mechanism of 
the system base.

Clear the label as indicated below.

DELTA2_IR.book  Page 183  Vendredi, 18. septembre 2009  1:07 13

Summary of Contents for IS-440













































































































































































































Reviews:

No comments