Neopost IS-440 Page 90 User Manual Download

Page: 90 / 204

Managing Accounts and Access Rights

Editing Accounts

Use the procedures below to modify an account name or status.
The account number cannot be modified.

How to View / Edit Account Parameters

How to View /
Edit Account Pa-
rameters

To view or edit an account:

As supervisor (see

How to Log in as Supervisor

p.122 ):

The

Account list

screen is displayed.

Select the account (or type its number) and press [OK] .

Select Edit / Modify .
The

Edit / Modify

screen is displayed.

Select each parameter and change it using the keypad (use
key [C] to clear characters), and then press [OK] .
The

Account modification summary

screen is displayed.

Press [OK] to validate the changes.

Press

and type

5.2.1

or select the path:

> Account management > Manage accounts > Create a
new account

DELTA2_IR.book Page 84 Vendredi, 18. septembre 2009 1:07 13

Summary of Contents for IS-440













































































































































































































Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands

Neopost IS-440, User Manual

Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands