Neopost IS-440 User Manual Download

Page: 133 / 204

Configuring your Mailing System

127

System Time-outs and Settings

System settings include:

•

System motor time-outs

•

Sleep mode time-out

System Time-outs

The system time-outs are defined as follows:

How to Adjust the Time-outs

How to Adjust
the Time-outs

To adjust the time-outs:

As a user:

The

Time-out setting

screen is displayed.

Select each field and type the time-outs (Use [C] to clear
digits).

Press [OK] to exit.

8.6

System Time-outs and Settings

Start

The period of time the system waits for an envelope after pressing

Once this time-out is reached the machine stops.

Stop

The period of time the system waits for the next envelope after printing.
Once this time-out is reached, the machine stops.

Sleep

Period of inactivity after which the system automatically switches to
'Sleep' mode (see

Power Management

p.18 ).

You can set a long Stop time-out to have time to feed the hopper
before the machine stops.

Press

and

type

2.7

or select the path:

> Job settings > Time-out settings

DELTA2_IR.book Page 127 Vendredi, 18. septembre 2009 1:07 13

Summary of Contents for IS-440













































































































































































































Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands

Neopost IS-440, User Manual

Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands