Neopost IS-440 User Manual Download

Page: 142 / 204

Configuring your Mailing System

136

Imprint Default Settings

The settings of the imprint 'by default' include:

•

Imprint default settings : sets the default rate, ERA and slogan for mailing oper-

ations

•

Automatic Date Advance : enables early date change to continue printing postage

with the new date after post office closing hours

•

Printing offset : sets the default offset print position from the right side of the en-

velope.

Imprint Default Settings

You can set default parameters for the imprint elements that follow:

•

Rate

•

Prepaid imprint

•

ERA

•

Slogan

On list screens, a mark

indicates the default parameter.

Changing the Default Rate

How to Change the Default Rate

How to Change
the Default Rate

To change the default rate:

As supervisor (see

How to Log in as Supervisor

p.122 ):

Select the default rate using the rate wizard.

Press [OK] to validate.

Summary of Contents for IS-440













































































































































































































Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands

Neopost IS-440, User Manual

Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands