Neopost IS-440 Page 177 User Manual Download

Page: 177 / 204

Maintaining your Mailing System

171

Filling and Adjusting the Feeder Sealer

The sections below apply if the feeder has the sealer option.

Filling the Sealer Bottle

The automatic feeder uses water for sealing envelopes.
If the system is out of water, the mailing process continues but the envelopes will not

sealed properly.

How to Fill the Sealer Bottle

How to Fill the
Sealer Bottle

To add water (or sealing solution) to the bottle:

Remove the bottle from

its base and turn it over.

Unscrew the cap and fill
the bottle with water up

to the limit marks.

Screw the cap back and
put the bottle back into

place.

Adjusting the Sealing Water Flow

Before you adjust the sealing water flow, make sure that the brushes and sponge are

clean (see

How to Clean the Brushes and Sponge (Sealer)

p.172 ).

How to Adjust the Sealing Water Flow

How to Adjust
the Sealing
Water Flow

To adjust the sealing water flow:

Set the water flow using

the back lever.

When standing in front

of the feeder:



Push the lever

towards the left-hand

side to increase the

water level.



Push the lever

towards the right-hand side to decrease the water level.

10.2 Filling and Adjusting the Feeder

Sealer

DELTA2_IR.book Page 171 Vendredi, 18. septembre 2009 1:07 13

Summary of Contents for IS-440













































































































































































































Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands

Neopost IS-440, User Manual

Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands