Neopost IS-440 User Manual Download

Page: 186 / 204

Troubleshooting

180

Auto-Feeder Jamming

Envelopes are stopped in the Auto-Feeder.

Possible causes

Actions

•

Mail piece is too thick.

•

Mail size is incorrect.

•

Too many envelopes are on the

feed deck.

•

Envelopes are not properly in-

serted on the feed platform.

1 Clear the Automatic Feeder as in-

dicated below.

2 Correct the cause:



Mail sizes: see

Mail Specifi-

cations

p.191 .



Envelope stack height: 4" max.



Envelope stacking: see

Using

the Feeder

p.30

Possible causes

Actions

•

Sealing is ON while feeding closed

envelopes.

1 Feed sealed envelopes only with

sealing OFF.

2 Check that already sealed en-

velopes are properly sealed at the

leading edge. Incompletely sealed

envelopes may jam.

The mail transport path should be regularly cleaned. See

Clean-

ing the Mail Path

p.172 .

DELTA2_IR.book Page 180 Vendredi, 18. septembre 2009 1:07 13

Summary of Contents for IS-440













































































































































































































Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands

Neopost IS-440, User Manual

Search results

Summary of Contents for IS-440

Reviews:

Related manuals for IS-440

Brands by name

Popular brands