July 2003
NEC Business Solutions Ltd
348 – H5
Hold With Recall (Exclusive & Non- Exclusive)
Doc. No. 8
201 - Re
lease 1.0
July 2003
1.
Momentarily press the hookswitch; the call is placed on Exclusive
Hold. If the handset is returned to the cradle, the call recalls
immediately.
2.
To retrieve a held call, momentarily press the hookswitch; the held call
is connected.
- OR -
To retrieve a held call, return the handset to the cradle.
3.
When recall begins, lift the handset and the call is connected.
SERVICE
CONDITIONS
MULTILINE TERMINAL
Non-Exclusive Hold
After Non-Exclusive Hold is set, the user can originate or answer
other calls.
Any station with the same outside line or programmed Call
Appearance key can pick up the held call.
A CO/PBX call on Non-Exclusive Hold can be picked up by dialling an
Access Code (Specified Line Seizure) if assigned in System
Programming.
After a preprogrammed time (default: 1 minute), the held or parked line
recalls to the station where the call was placed on Hold.
The station where the Hold originated receives an I-Hold indication
(flashing green LED). The LED associated with the held line key
flashes red on all other Multiline Terminals.
Exclusive Hold
After Exclusive Hold is set, the user can originate or answer
other calls.
If assigned, a call is held on a CO line key appearance. If not assigned,
the call is exclusively held on Call Appearance key.
Only the station where the Exclusive Hold was set can retrieve the
held call, until the call recalls.
After a preprogrammed time (default: 1 minute), the held line recalls to
the station where the call was placed on hold and the held call
changes to Non-Exclusive Hold.
The LED of other Multiline Terminals for the held line have a red LED
steadily lit until the call recalls.
Exclusive Hold and Non-Exclusive Hold Recall time intervals can be
adjusted independently of one another.
To execute from a Single Line Telephone with a Call in progress:
