Features and Specifications Manual
R1 – 479
Doc.
No. 8201 -
Release 1.0
July 2003
Recall Key
R-1
FEATURE
DESCRIPTION
The Recall key feature either generates a hookflash to access features
provided by the outside exchange or abandons a call while retaining the
CO/PBX line for another call. Each Multiline Terminal is equipped with a
Recall key. The function of this key is set in System Programming.
SYSTEM
AVAILABILITY
Terminal Type
All Multiline Terminals.
Required Components
None.
OPERATING
PROCEDURES
1.
Press
S
.
2.
Receive new CO dial tone; line is not released.
1.
Press
S
.
2.
Receive PBX/Centrex second dial tone.
SERVICE
CONDITIONS
Data Assignment
The default duration of the timed disconnect signal or hookflash is 100
milliseconds and is programmable system-wide.
A hookflash can be programmed as any digit in a Speed Dial buffer.
Single Line Telephones can generate a hookflash on a CO/PBX line
if allowed in System Programming (system-wide) or by an
Access Code.
General
The Recall key functions only on Loop Start Trunks.
A Drop key can be programmed on a Flexible Line key or One-Touch
key to be used for abandoning a call and retaining the same PBX/
Centrex line.
While receiving busy, error tone, or an internal call, press the Recall
key to provide a new internal dial tone.
To use this feature with an outside CO call in progress:
To use this feature with a PBX/Centrex call in progress:
