July 2003
NEC Business Solutions Ltd
578 – T4
Tone Override
Doc. No. 8
201 - Re
lease 1.0
July 2003
Restrictions
Tone Override can be accomplished only after receiving a call waiting
tone.
An attempt to Tone Override a Multiline Terminal may be denied for the
following reasons:
z
The Multiline Terminal is set in the Do Not Disturb (DND) mode.
z
Auto Redial is activated.
z
During Station Programming.
z
The Multiline Terminal is denied the ability to receive a Tone
Override.
z
Another station is already sending a Tone Override to this station.
z
Account Code Entry is activated.
General
One Tone Override at a time can be received at a Multiline Terminal.
This Tone Override is heard over the handset and speaker (if the
receiving party is off-hook with the handset).
If a Multiline Terminal is assigned for Data Line Security, a Tone
Override is not heard over the handset; however, the Tone Override is
sent and heard from the speaker when the Multiline Terminal user is
off-hook with the handset.
Tone Override is allowed from a Single Line Telephone until the PBR
times out (default: 10 seconds).
If Tone Override is used from a Dial Pulse Single Line Telephone,
default Access Code must be changed to a numerical digit.
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
System Data Name
Memory
Block
Function
1-8-07
Attendant
Page-Line
Key
1-8-08
Station
Page-Line
Key
¶
+BTS
Class of Service (Station) Feature Selection 2
1-8-08
1-8, 3-3
¶
+BTT
Station to Class of Service Feature Assignment
4-17
¶
+BTT
SLT Data Line Security Assignment
4-90
