Features and Specifications Manual
O1 – 443
Doc.
No. 8201 -
Release 1.0
July 2003
Off-Hook Ringing
O-1
FEATURE
DESCRIPTION
The Off-Hook Ringing feature alerts a Multiline Terminal user that an
incoming outside call is ringing to that station while the user is engaged on
another call. Off-Hook Ringing is provided through the built-in speaker of
the Multiline Terminal and at a lower volume than On-Hook Ringing.
SYSTEM
AVAILABILITY
Terminal Type
All Multiline Terminals.
Required Components
None.
OPERATING
PROCEDURES
1.
Go off-hook with the handset.
2.
Dial the Access Code (default
F0
).
3.
Dial
A
from the dial pad.
4.
Press press
M
(
^
= increase) or (
v
= decrease) to increase/decrease
off-hook ringing volume.
5.
Go on-hook.
SERVICE
CONDITIONS
Data Assignment
Off-Hook Ringing is assigned per station (default All stations have Off-
Hook Ringing).
Restrictions
Off-Hook Ringing is not provided when the Multiline Terminal speaker
is activated or when the terminal is in Do Not Disturb (DND) mode.
General
Off-Hook Ringing applies only to lines assigned to ring.
At system default, Off-Hook Ringing tone volume is approximately 10
dB lower than On-Hook Ringing tone volume.
The Off-Hook Ringing feature is effective when a headset is used.
Off-Hook Ringing follows the Distinctive Ringing Pattern selection and
not Synchronous Ringing.
Off-Hook Ringing is provided for calls to a Secondary Incoming
Extension when the station user is busy on an internal or outside call.
To set off-hook ringing volume:
