Utilizing Power Management 5-5
Power Savings
This option lets you specify when power saving features are
enabled. Select from the following choices.
■
Always – enables Power Management when the system
is running on either battery or AC power. (This is the
initial setting that is set at the factory. Such settings are
called defaults.)
■
Battery – enables Power Management when the system
is running on battery power.
■
Disable – disables Power Management.
LCD Bright Ctrl
Specifies the initial brightness setting for the LCD panel.
Select from the following choices.
■
Full — default setting when running on AC power
■
Standard — default setting when running on battery
power
Battery Low
Enabling Battery Low lets you direct the system to enter
Suspend mode when it detects low battery power. Highlight
the option and press
Enter
. A check mark appears next to
the option.
The default is “Warn Only.” No check mark appears next
to the Battery Low option when this setting is used.
Alarm Resume
When enabled, this option lets you direct the system to exit
power-saving modes at a specified time. Once you enable
the option, the system lets specify a time of day (for exam-
ple, 08:30) to resume operation mode.