Using the SCU 4-3
■
The next three blocks show system settings.
The Memory block displays system memory
information.
The Peripherals block shows settings for system
peripherals.
The Drives block specifies the diskette drive and
hard disk drive installed.
■
The bottom line of the screen shows what key functions
are available at that screen level and what they do.
SCU USE
To make selections in the SCU menus and submenus, use
the keyboard keys as follows:
1.
Use the right and left cursor arrows to highlight your
menu selection.
2.
Press
Enter
.
3.
In the submenu, use the up and down cursor arrows to
highlight a suboption.
4.
Press
Enter
. Suboptions give three ways to make selec-
tions, depending on the option:
■
Some options require that you enter information, as
when setting the date or time.
■
Some options toggle between being enabled and
disabled, as when selecting a start-up setting for
Num Lock through the SCU. Press
Enter
to enable
a highlighted option. A check appears next to the
enabled option.
Press
Enter
to disable an enabled option. The option
is disabled and the check disappears.
