NEC VERSA DOCK - SERVICE, Service Manual

Page: 38 / 121

2-22 System Configuration and Setup

USB devices (two ports with hub)

MIDI/Game devices

Audio devices.
Installing Devices in the File Bays
The NEC Versa Dock has two 5.25-inch half-height bays for installing optional
devices. The bay located on the right front of the NEC Versa Dock (the side
closest to the keylock), supports the installation of an optional VersaBay III
Adapter Kit. Installing the Adapter Kit transforms the bay into a VersaBay III.
You can then use your optional VersaBay III devices in the NEC Versa Dock.
Installing devices in the file bays involves the following procedures:
n
Removing the NEC Versa Dock docking tray, front panel and cable
cover.
n
Disconnecting the cables from the motherboard.
n
Connecting the cables to the device.
n
Installing the device in the NEC Versa Dock.
n
Reconnecting the cables to the motherboard.
n
Replacing the NEC Versa Dock cable cover, docking tray and front
panel.
Use the instructions in the sections that follow to install an IDE device in a file
bay and to install the optional VersaBay III Adapter Kit.
Installing Devices in the File Bays
The NEC Versa Dock has two 5.25-inch half-height bays for installing optional
devices. The bay located on the right front of the NEC Versa Dock (the side
closest to the keylock), supports the installation of an optional VersaBay III
Adapter Kit. Installing the Adapter Kit transforms the bay into a VersaBay III.
You can then use your optional VersaBay III devices in the NEC Versa Dock.
Installing devices in the file bays involves the following procedures:
n
Removing the NEC Versa Dock docking tray, front panel, and cable
cover.
n
Disconnecting the cables from the motherboard.
n
Connecting the cables to the device.
n
Installing the device in the NEC Versa Dock.
n
Reconnecting the cables to the motherboard.
n
Replacing the NEC Versa Dock cable cover, front panel, and docking
tray.