System Configuration and Setup 2-31
8.
Fit the IDE device into the bracket and determine which of the two front-to-
back positions best suits the type of device you are installing.
Installing a 3.5-inch IDE device in the file bays without a
3.5-inch Universal Installation Kit can short circuit and burn
out the device. Be sure to install 3.5-inch IDE devices in the
file bays using a 3.5-inch Universal Installation Kit.
9.
Align the screw holes on the side of the device with the screw holes on the
bracket. Attach the device to the bracket using the four screws that came
with the IDE device.
Attaching the device to the bracket
A
- Device bracket screws (4)
10.
Slide the device and bracket into the file bay.
Sliding the device and bracket into the file bay
Summary of Contents for VERSA DOCK - SERVICE
