NEC VERSA DOCK - SERVICE, Service Manual

Page: 14 / 121

1-8 Introducing the NEC Versa Dock
Right Side
The keylock switch on the right side of the NEC Versa Dock is shown in the
following figure. A description follows the figure.
Right side feature
A - Keylock switch
n
Keylock switch — Provides three settings that let you control NEC Versa
removal. An alarm sounds if someone tries to remove the NEC Versa
while it is locked onto the NEC Versa Dock, even if the NEC Versa Dock
is powered off or is disconnected from AC power.
Motorized docking is only enabled when the keylock switch
is in the full upright position.

Locked – Prevents the NEC Versa from being removed from the NEC
Versa Dock. You must use the key to unlock the unit before removing
the NEC Versa.

Normal – (Default position). Allows you to motorize dock or undock
the NEC Versa. Set the keylock to this position for normal use. To
prevent electrical damage, manual undocking is not allowed when the
keylock is in this state.

Manual – Allows you to remove the NEC Versa by hand. Use the
unlocked position for emergency undocking only. Otherwise, use the
Normal lock setting for normal use and the Locked setting to
physically secure your system to the NEC Versa Dock.
If no computer is docked and the keylock is in the Locked position,
no one else can use their computer with the NEC Versa Dock. The
key can only be removed from the system while the keylock is in the
Locked position.