background image

Getting Services and Support   8-7

2. 

Press 

Enter

 twice.

3. 

Enter your first name, last name, and password. Press 

Enter

 after each.

4. 

Follow the screen prompts until the Main menu appears.

5. 

At the Main menu, select 

J

 to join a conference. Select 

Conference 2

 for the

laptop and portable PC conference.

6. 

From the Main menu, press 

and 

Enter

 for the File menu.

7. 

At the File menu, select 

F

 for a list of downloadable files. Follow the

prompts to select a file for downloading.

Executable files automatically format your diskette when you download files

from the BBS. Formatting destroys any data on the diskette. Before you download
files from the BBS, check that you do not have information on the diskette that you
need.

After you complete downloading your file, log off the BBS as follows:

1. 

Press 

Enter

 (to continue).

2. 

Press 

G

 (command for Goodbye/Hangup).

3. 

Press 

Enter

.

NEC CSD Support Services

NEC CSD also offers direct technical support through Support Services. (NEC
CSD Support Services is for U.S. and Canadian customers only; international
customers should contact the local NEC office or dealer for the support and
service available in your country.)

Direct assistance is available 24 hours a day, 7 days a week. Call the NEC CSD
Support Services, toll free, at 

1-800-632-4525

 (U.S. and Canada only) for the

following support.

n

 

System hardware — toll-free phone support is limited to the length of the
standard warranty.

For hardware support after the standard warranty, get system hardware
support for a fee.

Summary of Contents for VERSA DOCK - SERVICE


























































































































Reviews: