NEC VERSA DOCK - SERVICE, Service Manual

Page: 53 / 121

System Configuration and Setup 2-37
7.
Replace the front part of the docking tray. Lower the front part of the
docking tray onto the NEC Versa Dock, secure the three screws, then finish
with the three rubber feet.
Replacing the docking tray
Installing PCI Cards
Two PCI slots let you add two PCI cards to your NEC Versa Dock. The top slot
supports a full-size PCI card and both slots support a half-size (or smaller) PCI
card. PCI connectors are located in the back of the NEC Versa Dock. Only the
top slot supports a full-size card.
The optional NEC 3Com Fast EtherLink LX provides a networking solution for
the NEC Versa Dock for systems running Windows 95 and Windows NT 4.0.
This PCI card supports Wake on LAN technology, which allows you to manage
your networked systems remotely.
For installation and configuration information, see the documentation that came
with the NEC 3Com Fast EtherLink LX.
Follow these steps to install a PCI card in the NEC Versa Dock.
1. Unplug the NEC Versa Dock before installing or removing any PCI cards.
2. Remove the back cover by locating and removing the two screws.
3. Put the screws in a safe place for use when replacing the cover.