NEC UNIVERGE GT890 User Manual Download Page 56

Page: 56 / 297

Type

Displays call type (incoming/outgoing).

Voice call icon

Originates a voice call. Tap and hold activates hands-free mode.

Video call icon

Originates a video call.

Delete

Tap and hold on a history deletes individual history data.

Note:



Items marked with * are

the end of the value is displayed with […] if the input value is longer than

the field size.



Depends on usage environment, the time setting information will be deleted by turning on / off the

main unit power. In that case, call histories are not recorded unless fix date & time setting.

Set the date & time again under

Settings > Basic > Date and time

on the LCD screen.

Summary of Contents for UNIVERGE GT890










































































































































































































































































































Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Related manuals for UNIVERGE GT890

Brands by name

Popular brands

NEC UNIVERGE GT890, User Manual

Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Related manuals for UNIVERGE GT890

Brands by name

Popular brands