NEC UNIVERGE GT890 User Manual Download Page 223

Page: 223 / 297

222

Change Bluetooth Device Name

The phone uses "ITX-3370_XXXXXX"

as Bluetooth device name by default where “XXXXXX” are the last

6 digits of the phone’s Bluetooth MAC address. The device name will be visible to other devices when

connecting them. Follow the steps below to change the name:

1. Go to the application menu



Settings



Features



Bluetooth

2. Turn on

Bluetooth

3. Select

Additional settings

4. Tap "Device name".

5. Enter a name and tap

"Rename".

Pair with a Bluetooth Device

Before connecting the phone with another Bluetooth device, you must pair them first. They will stay paired

afterwards unless they are unpaired.

1. Go to the application menu



Settings



Features



Bluetooth

2. Turn on

Bluetooth

3. Tap

Additional settings

and select “Visible to nearby Bluetooth devices” to make the GT890 phone

visible to all nearby Bluetooth devices.

4. The phone scans and displays the IDs of all available Bluetooth devices in range. If the device you

would like to pair with does not show up in the list (available devices), ensure that the other device is

turned on and set to be discoverable.

5. If the GT890 stops scanning before the other device is ready, press

button to scan again.

6. Once the Bluetooth device shows up in the result, tap on it to start pairing. Confirm the passkey in the

prompted message (if any). Or if passcode is required, please refer to the device's documentation or

other procedures to obtain the passcode.

Summary of Contents for UNIVERGE GT890










































































































































































































































































































Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Related manuals for UNIVERGE GT890

Brands by name

Popular brands

NEC UNIVERGE GT890, User Manual

Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Related manuals for UNIVERGE GT890

Brands by name

Popular brands