NEC UNIVERGE GT890 User Manual Download Page 217

Page: 217 / 297

216

Connect to Network and Devices

The phone supports a variety of network connections (Ethernet, Wi-Fi) and device connections, including

EHS headset (Poly), USB, SD card and Bluetooth device. You can connect the phone and transfer files

from/to the GT890 using a USB connection, SD card or Bluetooth.

Ethernet

Ethernet connection is turned on as DHCP by default. If you would like to use Ethernet connection for

network access, please make sure the Ethernet cable is plugged in to the LAN port on the back of the

phone.

To configure Ethernet settings on

the LCD:

1. Go to the application menu



Settings



Network



Ethernet settings

In Preferred Internet protocol, and select internet protocol you use.

By default, it’s “IPv4 only”.

Note:

IPv6 is not supported. Please leave this setting as default.

2. Tap

IPv4 settings

3. Tap

IPv4 address Type

to select DHCP, Static IP or PPPoE as the address type.



For DHCP, save the setting and the GT890 should be able to get IP address from the DHCP server

in the network.



For static IP, enter IP Address, Subnet Mask, Default Gateway, DNS Server and Alternative DNS

server for the GT890 to correctly connect to the network.



For PPPoE, enter PPPoE account ID and password so phone can get an IP address from the

PPPoE server.

Note:

Although

IPv6 settings

will be used to configure the IPv6 address type, IPv6 is not supported. Please

leave this setting as default.

Wi-Fi

WI-FI is supported and built-in on the phone. The phone can be connected to network if Wi-Fi is available

within the area.

Summary of Contents for UNIVERGE GT890










































































































































































































































































































Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Brands by name

Popular brands

NEC UNIVERGE GT890, User Manual

Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Brands by name

Popular brands