NEC UNIVERGE GT890 User Manual Download Page 53

Page: 53 / 297

History screen

Table 20: History screen functions.

Item

Name

Description

All

Displays all histories.

Incoming

Displays incoming call histories.

Outgoing

Displays outgoing call histories.

Missed

Displays missed call histories.

Call type icons

Displays call types (outgoing, incoming, missed). *

Name

When registered in the Phonebook of the terminal, name is

displayed. When not registered in the Phonebook of the terminal,

the number is displayed.

Number

Displays numbers.

When the caller is not registered in the Phonebook of the terminal,

this space does not display any data.

Time/date of occurrence

Displays time and date of the call.

Voice call icon

Tap this icon; ST500 makes a voice call to the number. Tap and

hold activates hands-free mode.

Display

for

non-

registered number

Number is displayed for Name field.

Figure 42: History screen.

Summary of Contents for UNIVERGE GT890










































































































































































































































































































Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Related manuals for UNIVERGE GT890

Brands by name

Popular brands

NEC UNIVERGE GT890, User Manual

Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Related manuals for UNIVERGE GT890

Brands by name

Popular brands