NEC UNIVERGE GT890 User Manual Download Page 295

Page: 295 / 297

294

Notices

(1)

Do not reprint or copy this manual in whole or in part without the express permission of NEC.

(2)

The contents of this manual are subject to change without prior notice in the future.

(3)

This manual is published under strict quality control standards. If, however, you have any

questions, spot an error, or find a description lacking, please feel free to contact us.

Related documents

This section introduces related documents to this manual. Please refer to these if you do not find any

information in this manual.

Note:

Documents for the heading “For administrator” contain content that requires expert knowledge and skills.

Please contact your administrator if you want to check the contents described in these documents.

For user



Safety Precautions and Regulatory Notices for GT Series

For administrator



Standard SIP Video Terminal IP Phone GT890 Administration Guide(ST500)



Standard SIP Terminal XML Configuration File Generator User Guide for GT series

Summary of Contents for UNIVERGE GT890










































































































































































































































































































Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Brands by name

Popular brands

NEC UNIVERGE GT890, User Manual

Search results

Summary of Contents for UNIVERGE GT890

Reviews:

Brands by name

Popular brands