NEC T30A User Manual Download Page 188

Page: 188 / 252

-161-

9.4

Cleaning of Magazine Filter

The magazine of the library contains a filter to prevent dirt and dust entering the library. Clean the

filter about once a year so that it does not become plugged up.

To clean the magazine filter, suction out dirt and dust from the magazine bezel part by using a

vacuum cleaner or similar device.

Lightly place the cleaner nozzle on magazine bezel holes in the rectangular areas in the figure below

and suction out the dirt and dust.

9.5

Cleaning of cartridge

Using a commercial dry cotton swab, wipe off dust adhering to the surface of the removed cartridge.

Be careful not to open the shutter of the tape cartridge during cleaning, as this may
cause dust to enter the tape cartridge.

Summary of Contents for T30A





























































































































































































































































Search results

Summary of Contents for T30A

Reviews:

Related manuals for T30A

Brands by name

Popular brands

NEC T30A, User Manual

Search results

Summary of Contents for T30A

Reviews:

Related manuals for T30A

Brands by name

Popular brands