-110-
Location:
Set the device's physical location.
Contact:
Set contact information.
SNMPv3 engine ID:
The SNMPv3 Agent's Engine ID may have to be set for the manager.
3. Submit button
This button is used to confirm settings. When the Submit button is clicked, the entered values are
checked and are set when normal.
4. SNMPv3 User List
Enter the user information that is required to monitor the MIB data on devices accessed by the
Manager using the SNMPv3 protocol. The user names registered here are used to enable
execution of snmpget and snmpwalk commands from the SNMPv3 Manager.
When clicking modify button, following screen is displayed.
After setting “User name”, “Authentication” and “Privacy”, click “Submit" to register a new user.
In setting Authentication or Privacy, a password is needed.
Set Validity to Enable to make the user who registered effective.
Figure 5-26 SNMPv3 setup
