NEC T30A User Manual Download Page 211

Page: 211 / 252

-184-

10.12

Replacing the Internal FC cable

Pull out the drive and remove the two connectors connected to the drive, referring to

"10.5

Replacing the Drive Module

Remove the cable from the cord keeper.

Remove the chassis-side connector of the internal FC cable.

The connector cannot be removed by using your fingers the space is too narrow, so remove it by
picking it up with tweezers from above.

Pull out the drive from the chassis and remove the drive-side connector of the internal FC cable.

Mount the internal FC cable using the opposite procedure to the procedure used to demount it.

When inserting the drive and mounting the drive cover, take care not to get the cables caught.

Internal FC cable, chassis-side connector

Internal FC cable, drive-side connector

Summary of Contents for T30A





























































































































































































































































Search results

Summary of Contents for T30A

Reviews:

Related manuals for T30A

Brands by name

Popular brands

NEC T30A, User Manual

Search results

Summary of Contents for T30A

Reviews:

Related manuals for T30A

Brands by name

Popular brands