NEC T30A User Manual Download Page 37

Page: 37 / 252

-10-

1.3.6

Drive Sled Ingicator

These indicate the states of the drive.

Table 1-5 Drive Sled ingicator

LED indicating the status and maintenance requirements

：

Maintenance request status.

Off

：

normal.

LED indicating the status of power supply

：

Power is supplied.

Off

：

Power is not supplied.

LED indicates the communication status to the library

：

Recognized from the library.

Blinking

：

Data transfer.

Off

：

Not recognized from the library.

LED indicating the status of the cartridge

：

Cartridge exist.

Off

：

No cartridge.

LED indicating the connection status with host.

：

Connected to the host.

Blinking

：

Data transfer or initializing state.

Off

：

Port closed or disconnected to the host.

Summary of Contents for T30A





























































































































































































































































Search results

Summary of Contents for T30A

Reviews:

Related manuals for T30A

Brands by name

Popular brands

NEC T30A, User Manual

Search results

Summary of Contents for T30A

Reviews:

Related manuals for T30A

Brands by name

Popular brands