-220-
AppendixD Tape Alert
D-1 Library Tape Alert
Code
Flag
Contents - Action
1
Library Hardware A
Changer mechanism is having trouble communicating
with the internal drive
・
Turn the power off and on again.
4
Library Hardware D
The changer mechanism has a hardware fault that is
not mechanically related or requires a power cycle to
recover
・
Turn the power off and on again.
8
Library Maintenance
Library preventative maintenance required
・
If it is detected the cleaning request, clean
the drive.
12
Library Stray Tape
Stray cartridge left in library after previous error recovery
・
Please remove the tape cartridge from the drive.
Please refer to Section 4.7.2 if you take out in the
operation of the library apparatus.
・
Turn the power off and on again.
13
Library Pick Retry
Operation to pick a cartridge from a slot had to perform an
excessive number of retries before succeeding
・
If events occur continues, call the maintenance staff.
14
Library Place Retry
Operation to place a cartridge in a slot had to perform
an excessive number of retries before succeeding
・
If events occur continues, call the maintenance staff.
16
Library Door
Changer door open prevents library functioning
・
After storing the magazine, re-run the operation.
17
Library Mailslot
Mechanical problem with import/export mailslot
・
Call to maintenance staff.
18
Library Magazine
Library magazine not present.
・
After storing the magazine, re-run the operation.
23
Library Scan Retry
Operation to scan the bar code on a cartridge had to
perform an excessive number of retries before
succeeding
・
Exchanger the barcode label.
・
If events occur continues, call the maintenance staff.
27
Cooling Fan Failure
One or more fans inside the library have failed. Internal
flag state only cleared when all fans are working again
・
Call to maintenance staff.
28
Power Supply
Redundant power supply failure inside the library
subsystem
・
Call to maintenance staff.