manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 71 / 236

Share
Download
NEC POWERMATE PROFESSIONAL PII User Manual Download Page 71

    

 Understanding System Features   3-7

 With Flash ROM, a ROM BIOS change:

„

is fast and easily done using a Flash utility

„

eliminates the expensive replacement of ROM BIOS
chips, and reduces system maintenance costs

„

reduces inadvertent system board damage that can take
place when replacing ROMs

„

facilitates adopting new technology while maintaining
corporate standards

„

gives network administrators company-wide control of
BIOS revisions.

 Information on how to use the Flash utility is provided in
Chapter 4, NEC Drivers and Utilities.

Graphics Features

 The system features a PCI local bus motion video playback
controller and graphics accelerator.

Motion Video Controller

 The motion video controller is supported on all
configurations. The video controller integrates a Windows
graphical user interface (GUI) engine and motion video
playback hardware.

 MPEG is a compression/decompression standard developed
by a professional video group called the Motion Picture
Experts Group. MPEG produces full-screen,
30-frames-per-second (fps), broadcast-quality digital video.
This means viewing movies on your computer. Support
includes:

„

MPEG-1 or MPEG-2

„

Video for Windows

„

Active Movie.

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments