manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 230 / 236

Share
Download
NEC POWERMATE PROFESSIONAL PII User Manual Download Page 230

   

Index-2

Disk lamp, 1-4
Diskette drive, 1-5
Diskettes, included, 3-1
Documentation, xvi, 2-29, 2-30
Drivers, 3-1

changing video, 2-18
video, 4-41

E

ECP. See Enhanced Capabilities

Port

E-mail support, 7-8
Enhanced Capabilities Port, 3-10
Enhanced Parallel Port, 3-10
EPP. See Enhanced Parallel Port
Error message, 8-1
Exiting setup, 4-33
Expansion board

installation, 5-9
removal, 5-12

Expansion board installation, 5-8,

5-9

Expansion slots, 3-3
External options, 5-39

parallel printer, 5-39
serial devices, 5-40

F

Fax support, 7-8
FaxFlash service, 7-2
Feature connector, 3-10
Features, 3-3

audio, 2-11
back, 1-8–1-12
CD-ROM reader, 1-6
diskette drive, 1-5
diskettes, 2-7
Flash ROM, 3-6

front, 1-2–1-8
graphics, 3-7
Heceta chip, 4-40
PCI local bus, 3-6
Pentium II, 3-4
power saving, 1-3
SCSI port, 3-11
SIMM memory, 3-4
system controls and lamps,

1-3–1-4

Finding information, 2-31
Flash ROM, 3-6
Flashing the BIOS, 4-34
Floppy drive cable, 5-23
Front panel removal, 5-33
Full Power On mode, 1-4

G

Graphics, 3-7

MPEG, 3-7

Graphics accelerator, 3-8
Graphics specifications, D-1

Matrox Mystique, D-1
Number Nine Imagine Series 2,

D-2

H

Handling CDs, 2-9
Hard disk drive parameters, 4-7
Hard disk signal cables, 5-24
Headphones, 1-7
Heceta chip, 4-40
Help, 8-9

from the NECCSD Technical

Support Center, 8-10

from your company, 8-9
from your NECCSD dealer, 8-9
repair service, 8-11

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments