manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 110 / 236

Share
Download
NEC POWERMATE PROFESSIONAL PII User Manual Download Page 110

    

 4-34   NEC Drivers and Utilities

Load Setup Defaults

 To load all the default Setup values in the Setup menus,
select “Load Setup Defaults” from the Exit Submenu.
Reloading the defaults does not affect any set passwords.
The program displays this message:

 Load Setup Defaults?
Press Enter to Continue
Press ESC to Abort

 To load the defaults shipped with the system, press 

Enter

.

Press 

Esc

 to return to the Exit submenu without affecting

your changes.

Discard Changes

 To undo any changes you have made in the Setup menus
since Setup was last saved, select “Discard Changes.” The
program displays this message:

 Discard Changes?
Press Enter to Continue
Press ESC to Abort

 To reset all changes made in the current session of Setup,
press 

Enter

. Press 

Esc

 to return to the Exit submenu

without affecting your changes.

FLASH UTILITY

 Check the NECCSD Bulletin Board Service (BBS) for
available updates to your system BIOS. You can obtain
information to update your system with the latest BIOS
version from the NECCSD Bulletin Board Service.

 Update the BIOS from the BIOS flash diskette as follows.

1. 

Write down the Setup parameters currently set on the
system.

2. 

Turn off the system.

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments