NEC Drivers and Utilities 4-31
Set Administrative Password
This field allows you to enable an administrative level
password during POST and to enter Setup. When both
the “User Password is” and “Administrative Password
is” are “Enabled,” only the Administrative Password
gives you full access to all Setup fields. This field can be
either “Enabled” or “Disabled.” The default is
“Disabled.”
When the Administrative password is set, you can
configure User Privilege levels for limited access, no
access, view only, or full access.
Enter Password and Set Administrative Password
Enable either or both the User or Administrative Passwords
and a dialog box appears with the following prompts.
Passwords are not case-sensitive.
To set a password, type the password and press
Enter
.
Reenter your password and press
Enter
.
Enter new password: [ ]
Confirm new password: [ ]
If there is already a User or Administrative Password, then
a dialog box with the following prompts appears.
Enter current password: [ ]
Enter new password: [ ]
Confirm new password: [ ]
When both User and Administrative Passwords are set, the
Clear User Password field appears. Press
Enter
to clear a
User Password and display a Confirmation dialog box.
Unattended Start
The Unattended Start field controls the point at which the
User Password is required. The Unattended Start field can
only be set if a User Password is in effect.
Summary of Contents for POWERMATE PROFESSIONAL PII
Page 12: ...xii Contents ...