manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 119 / 236

Share
Download
NEC POWERMATE PROFESSIONAL PII User Manual Download Page 119

    

 NEC Drivers and Utilities   4-43

 Before System Recovery, you will need to

„

back up all your data files to an external storage device
(diskette, tape, or zip cartridge drive). System Recovery
removes all data.

„

be prepared with software installation diskettes of any
software application programs that you installed
yourself.

 After System Recovery, you will need to

„

restore to the hard disk all the data files that you backed
up before System Recovery.

„

reinstall any software application program that you
installed yourself.

 The following sections describe each of these options. If
your preinstalled software becomes unusable, see
“Recovery Options” later in this section.

Restoring Individual Files

 Here’s how to restore individual files to your hard disk:

1. 

With system power on, insert the CD Restore disc into
the CD-ROM reader.

2. 

On the Windows 95 desktop, double click “My
Computer.”

3. 

Double click the CD-ROM reader “(F:)” icon. The NEC
System Restore screen appears.

4. 

At the System Restore screen, click “OK” to restore
individual files. A license agreement appears.

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments