manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 24 / 236

Share
Download
NEC POWERMATE PROFESSIONAL PII User Manual Download Page 24

    

 Introducing Your Computer   1-7

 CD-ROM reader features

 The CD-ROM reader has the following features:

„

Headphone jack
Allows the connection of an optional set of headphones
with a stereo mini-jack plug.

„

Volume control knob
Lets you adjust the volume of an optional set of
headphones.

„

Open/close button
Opens or closes the reader’s loading tray. Press this
button when the computer power is on to insert or
remove a CD.

„

CD tray
Provides a surface for loading a CD into the reader.
Press the open/close button to open or close the CD tray.

„

CD busy lamp
Lights when the reader is retrieving data, music, or
graphics/audio from a CD. Do not eject the CD or turn
off the system unit when the lamp is on.

 

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments