manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 113 / 236

Share
Download
NEC POWERMATE PROFESSIONAL PII User Manual Download Page 113

    

 NEC Drivers and Utilities   4-37

PC Health Indicator

 PC Health Indicator consists of three parts:

„

Managing workstations

„

PC Health meter

„

PC health description.

Managing Workstations

 Client Manager sets up a connection to all the workstations
running on the network to allow the administrator to
monitor the functions of each workstation.

 The monitoring is in real time so that if an unhealthy
workstation is fixed, you can refresh the screen to view the
new correct PC health. You can also set the monitor to
report only unhealthy workstations.

PC Health Meter

 The PC Health meter is a traffic signal that provides the
following visual indicators of workstation health.

„

A red light means that a critical system event has
occurred. You are required to fix the problem
immediately.

„

A yellow light or noncritical system event requires that
you monitor the situation. It may be a problem that
could get worse and become a critical event.

„

A green light means everything is working fine with the
system.

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments