manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 182 / 236

Share
Download
NEC POWERMATE PROFESSIONAL PII User Manual Download Page 182

    

 7-4   24-Hour Information Services

NECCSD BULLETIN BOARD SERVICE

 If you have access to a modem, you can use the NECCSD
Bulletin Board Service (BBS) to get the latest information
on hardware and software. The BBS allows you to
download files (video drivers, printer drivers, BIOS
updates, etc.) for system enhancements and upgrades.

 The BBS can also be accessed through the CompuServe
online service.

Log onto the BBS as follows.

1. 

From the Windows desktop, click the 

Start

 button.

2. 

Point to Programs. Point to Accessories and then click

HyperTerminal

.

3. 

Double click the 

Hypertrm.exe

 icon. The

HyperTerminal program appears.

4. 

Follow the instructions on the screen to set up your
modem. Click the 

HyperTerminal

 help button for

information about dialing the phone number.

 If you need to check communications settings, check that
the settings match the following BBS parameters.

„

Baud rate: select any baud rate that matches your
modem

„

Parity: none

„

Data bits: 8

„

Stop bits: 1

„

Flow control: Xon/Xoff (select Hardware if using
14.4 bps or higher).

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments