NEC POWERMATE PROFESSIONAL PII User Manual Download Page 111

Page: 111 / 236

NEC Drivers and Utilities 4-35

Insert the flash diskette in drive A, and turn on the
system.

When the flash upgrade menu appears, choose “Update
Flash Memory Area from a file.”

When the menu asks you to enter a path/filename, use
the arrow keys to select the “.bio” file, and press

Enter

The utility asks for a confirmation that you want to load
the new flash into memory. Select “Continue with
Programming.”

After the upgrade completes, remove the upgrade disk.

Reboot the system and start the Setup program. Press
<

> to reset the BIOS defaults. Then, use the copy of

the Setup selections you made at the beginning of this
procedure to set the options.

See “NECCSD Bulletin Board Service” in Chapter 7, for
information about using the bulletin board (available in the
U.S. and Canada).

SCSISelect UTILITY

Select the SCSISelect utility at boot up. Press

Ctrl-A

soon as you see the SCSI utility information on the screen.
When the BIOS information appears, you have gone past
the window and must reboot.

The SCSISelect utility sets termination. In addition, from
the SCSISelect utility you can perform the following:

format a new SCSI drive

configure the host adapter

set a new SCSI ID.

To set a new SCSI ID, select the SCSI Device
Configuration menu. With the arrow keys, select Send Start
Unit Command. Change the unit ID number from no to yes.

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Search results

Summary of Contents for POWERMATE PROFESSIONAL PII

Reviews:

NEC POWERMATE PROFESSIONAL PII, User Manual, Page: 111 / 236

Search results

Summary of Contents for POWERMATE PROFESSIONAL PII

Reviews: