manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL PII, User Manual

The NEC PowerMate Professional PII user manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and valuable information on operating and maximizing the potential of your NEC PowerMate Professional PII. Get the most out of your product with this essential user manual.

Share
Download
background image

    

 Introducing Your Computer   1-11

 The keyboard port supports a personal system
(PS)/2®-compatible, 104-key keyboard with a 6-pin
mini DIN connector.

„

Mouse port
Attach the mouse that comes with your computer to this
port. The mouse port supports a PS/2-compatible
mouse.

„

Universal Serial Bus (USB) ports
Connects USB devices soon to be released. With USB
ports, you can connect mice, joysticks, keyboards, and
telecommunication devices. The speed varies between
12 megabits per second (Mbps) for printers and
1.5 Mbps for mice and keyboards. You can daisy chain
up to 127 devices using USB ports.

Locking Tab

 The locking tab on the rear of the system is provided as a
security feature. Use the locking tab to padlock the system
unit cover and prevent access to the inside of your
computer.

Power Supply Features

 The system power supply has the following features.

„

Power supply fan
Keep this area clear for proper ventilation. The power
supply fan cools system components and prevents them
from overheating.

„

Voltage selector switch
Sets the voltage for your system to 115 volts or
230 volts.

Summary of Contents for POWERMATE PROFESSIONAL PII













































































































































































































































Reviews:

No comments

Related manuals for POWERMATE PROFESSIONAL PII

IBM Aptiva 2156 Hardware Maintenance Service preview
Aptiva 2156
Brand: IBM Pages: 155
Gigabyte 3D Mercury User Manual preview
3D Mercury
Brand: Gigabyte Pages: 26
FabiaTech FX5502 User Manual preview
FX5502
Brand: FabiaTech Pages: 62
ASROCK DESKMINI SERIES User Manual preview
DESKMINI SERIES
Brand: ASROCK Pages: 70
Precision mySITE User Manual preview
mySITE
Brand: Precision Pages: 5
Lenze CPC 5100 Operating Instructions Manual preview
CPC 5100
Brand: Lenze Pages: 68
StarTech.com ARMSTS Instruction Manual preview
ARMSTS
Brand: StarTech.com Pages: 29
Chip PC Plug PC LXP 2310 Specifications preview
Plug PC LXP 2310
Brand: Chip PC Pages: 4
Kogan ERGOLUX ELRIPLGDKBA User Manual preview
ERGOLUX ELRIPLGDKBA
Brand: Kogan Pages: 16
Kogan ERGOLUX ELDUALMTWHA User Manual preview
ERGOLUX ELDUALMTWHA
Brand: Kogan Pages: 20
GIGAIPC QBiX-Pro-KBLB7100H-A1 Quick Start Manual preview
QBiX-Pro-KBLB7100H-A1
Brand: GIGAIPC Pages: 72
Shuttle XPC Barebobe SZ87R6 Product Specifications preview
XPC Barebobe SZ87R6
Brand: Shuttle Pages: 14
Shuttle X50 System Handbook preview
X50
Brand: Shuttle Pages: 13
Agilent Technologies Agilent 7700 Series ICP-MS Troubleshooting Manual preview
Agilent 7700 Series ICP-MS
Brand: Agilent Technologies Pages: 51
Acer A8003 Quick Start Manual preview
A8003
Brand: Acer Pages: 10
RadiSys EPC-2 Hardware Reference Manual preview
EPC-2
Brand: RadiSys Pages: 69
MeLe PCG02 Quick Start Manual preview
PCG02
Brand: MeLe Pages: 4
Radio Shack TRS-80 Technical Service Data preview
TRS-80
Brand: Radio Shack Pages: 83

Brands by name

Popular brands

Load more brands