Repair 5-19
Riser Board Removal
Use the following steps to remove the riser board:
1.
Open the system unit cover as previously described.
2.
Label all cables on the riser board and then disconnect the cables.
3.
Remove all expansion boards (see “Expansion Board Removal”).
4.
Remove the system board (see “System Board Removal”).
5.
Remove the three screws along the top edge of the riser board (see
Figure 5-17).
Figure 5-17 Locating the Riser Board Screws
6.
Slide the riser board out of the slots on the floor of the chassis.
7.
Lift the riser board out of the system unit.
