Appendix B
Jumper Settings
The following sections provide jumper settings for PowerMate Enterprise computers.
Settings are included for the following components:
system board
hard disk drive
CD-ROM reader
fax/modem board.
SYSTEM BOARD JUMPER SETTINGS
PowerMate Enterprise system board jumper settings are changed under the following
circumstances:
to reset the password and select CPU speed
to perform BIOS recovery.
NOTE:
Jumpers are set correctly at the factory for
the system configuration.
If the system requires a jumper change, change
only the setting for that condition. Otherwise,
keep the settings at their factory settings.
WARNING:
The system power must be off
before the cover is removed.
