manualshive.com logo in svg

NEC PowerMate Enterprise, Manual

The NEC PowerMate Enterprise user manual is essential for maximizing the functionality of this powerful product. You can conveniently download the comprehensive manual for free from our website, ensuring a seamless user experience. Unlock your device's potential by accessing the manual at manualshive.com.

Share
Download
background image

Setup and Operation      2-35

The Select Install CD reinstalls all or part of the computer’s software. Depending on the
operating system in use and the way the Select Install CD is used, you can do one or more
of the following:

„

operating system (OS) restore with disk rebuild (deletes all data on the disk)

„

operating system (OS) restore only, for systems running the Windows 95
operating system (preserves data on the disk)

„

selective application restore.

The OS Restore programs and the Selective Application Restore program use easy-to-
understand dialog boxes and screen messages so you can smoothly proceed through the
restore process.

Choosing a Restore Program

It’s important to choose the appropriate restore program. In some uses, the program can
delete all the data, as well as the operating system and/or applications on the hard disk.
Read the list below to verify that the program you choose fits the conditions under which
you are performing the restore.

„

Repartition and/or reformat the hard disk and restore the operating system
(“Auto” or “Custom”).

If there is a catastrophic system failure, use the OS restore to repartition and
reformat the hard disk and restore the operating system. Using the program is the
first phase of a full system restore. After restoring the OS, continue with a
Selective Application Restore.

See the section called “Rebuilding the Hard Disk and Restoring the Operation
System,” and under it, either “Auto Rebuild and Restore” or “Custom Rebuild
and Restore.”

„

Restore only the operating system (“Fix OS”).

If the hard disk does not need to be rebuilt, use the OS Restore to reinstall only
the operating system (for systems running the Windows 95 operating system). A
selective application restore does not need to be performed after only the
operating system is reinstalled.

See the section called “Restoring the Operating System.”

„

Restore some or all of the applications that came with the system.

The Selective Application Restore takes place after the Windows OS has booted.
It lets you choose the application software to reinstall. Use this program to
restore selected applications from the CD after rebuilding the hard disk, or at any
time to reinstall a software package that came with the computer.

Summary of Contents for PowerMate Enterprise




















































































































































































































































































Reviews:

No comments

Related manuals for PowerMate Enterprise

BAC 3000 Series Rigging & Assembly Instructions preview
3000 Series
Brand: BAC Pages: 24
Acer Power FG Guia Do Usuário preview
Power FG
Brand: Acer Pages: 25
IBM HC10 - BladeCenter - 7996 Service Manual preview
HC10 - BladeCenter - 7996
Brand: IBM Pages: 114
Acer Veriton 5600G Guia Do Usuário preview
Veriton 5600G
Brand: Acer Pages: 118
Steinberg HALion Sonic 2 Operation Manual preview
HALion Sonic 2
Brand: Steinberg Pages: 820
Toshiba Qosmio G50 Series Maintenance Manual preview
Qosmio G50 Series
Brand: Toshiba Pages: 446
Kennmex K790 Series User Manual preview
K790 Series
Brand: Kennmex Pages: 40
Elo TouchSystems D-Series User Manual preview
D-Series
Brand: Elo TouchSystems Pages: 66
Fanvil i23S User Manual preview
i23S
Brand: Fanvil Pages: 52
Fanvil i31S User Manual preview
i31S
Brand: Fanvil Pages: 54
Rikomagic MK802 IIIS User Manual preview
MK802 IIIS
Brand: Rikomagic Pages: 27
Axon P7900 User Manual preview
P7900
Brand: Axon Pages: 51
Keter JOBMADE Instruction Manual preview
JOBMADE
Brand: Keter Pages: 2
Spectrum Link Lectern Media Manager Series Owner'S Manual preview
Link Lectern Media Manager Series
Brand: Spectrum Pages: 17
3M Dynapro ET 3200 Series User Manual preview
Dynapro ET 3200 Series
Brand: 3M Pages: 97
Packard Bell oneTwo M3850 Service Manual preview
oneTwo M3850
Brand: Packard Bell Pages: 120
Jason.L Elements Workstation 2 Person Run Assembly Instructions preview
Elements Workstation 2 Person Run
Brand: Jason.L Pages: 5
IBM 6150 Hardware Maintenance Manual preview
6150
Brand: IBM Pages: 649

Brands by name

Popular brands

Load more brands