3-38 Option Installation
3 1/2-Inch Hard Disk Drive Installation
The 3 1/2-inch hard disk drive that comes with the system can be upgraded. Before adding a
new device, the installed 3 1/2-inch device may need to be removed.
Removing a 3 1/2-Inch Internal Device
Use the following steps to remove a 3 1-2-inch internal device.
1.
Remove the system unit cover as previously described.
2.
Unplug the power and signal cables from the hard disk drive.
NOTE:
When reinstalling the drive, note that all
power cables are keyed to fit only in the correct
position.
3.
Remove the four screws holding the 3 1/2-inch hard disk drive to the side of the
chassis (see Figure 3-33).
4.
Slide the 3 1/2-inch hard disk drive out of its bracket and remove it from the
system.
Figure 3-33 Hard Disk Drive Screws
